Beam Planning
Create a beam plan from a design. Yarn requirements auto-calculated. Stock checked before the beam starts.
Auto-calculated yarn requirements
Select a design. Enter the meter target. MobiOffice calculates warp ends, weft picks, and kilogram requirements per yarn type from the design specs. No manual formula. No approximation.
Yarn availability check
Before the beam plan is confirmed, MobiOffice checks current stock against requirements. If any yarn type is short, the plan is flagged. You don't find out mid-production.
Machine assignment on the same screen
Assign the beam to a specific loom or machine group from the planning screen. The loom shows the assigned beam and design in the production dashboard immediately.
Beam status from plan to fabric
Track the beam through its lifecycle: planned → yarn issued → loaded → running → completed. Every state change is logged with timestamp and operator.
Want to see beam planning running with your designs?
Send your loom count and a sample design on WhatsApp. We'll show you the calculation.