Weaving ERP for owners.
See everything without
asking anyone.
MobiOffice gives you production, wastage, targets, and order status from your phone — updated as shifts run. You stop chasing numbers. You start catching problems before they cost you.
Four moments that change when you go live
Check last night's production from your phone
Before you've had chai. You see which shift hit target, which didn't, which loom was down and when. No calls. No waiting for the morning tally.
Confirm beam loading is on track
You approved three new beam plans this week. The system shows which have been loaded, which are pending yarn, and which have started production. No walking the shed.
Spot a wastage spike before it compounds
One machine's warp wastage is 4% above target. You see it on the dashboard. You ask the production manager. It's a reed issue — gets fixed before the next shift starts.
The floor in your pocket.
The owner is often the last to know when something goes wrong on the floor. By the time the shift report arrives, the problem has compounded. Live visibility closes that gap.
MobiOffice mobile shows you production by loom and by shift as it happens. Supervisors enter doffing at the machine. You see it on your phone without making a call. When output drops, you know it in the shift, not the next morning.
- Live output by loom and by shift
- Target vs actual comparison per shift
- Downtime tracking and reason codes
- Supervisor-level accountability
- Push summaries at shift end
What you see in MobiOffice
Mobile owner dashboard
Production, wastage, targets, and order status from your phone. Updated as shifts run.
Shift-wise production vs target
See which shift hit target and which didn't, loom by loom. Accountability without confrontation.
Wastage alerts by machine
When a machine's wastage crosses your threshold, the system flags it. You see it before the shift ends.
Order status at a glance
Any customer order, any time. How much is done, what's in which stage, when it's likely to be ready.
No end-of-shift phone calls
Supervisors enter doffing live. You see it live. The 9 PM call to ask how many meters got done stops.
Profitability by design
Cost and speed factors in the design master let you compare target cost against actual yarn consumption per design.
The numbers you see are the real numbers.
In most weaving units, accounts see one set of numbers, the floor has another, and you work from a third. The same dispatch gets entered three times — once in a register, once in Tally, once in a spreadsheet. By the time it reaches you, something doesn't match.
MobiOffice is one integrated system. When the supervisor enters production, the inventory updates. When dispatch happens, the GST invoice is generated from the same data. Your accounts are in the same platform as your floor. What you see on the dashboard is what's actually happening — not numbers that were re-entered and might not match.
Full control means nothing to reconcile.
The dispatch invoice that goes to the customer was created the moment the supervisor scanned the last taka. The books and the floor are the same data. Month-end is just reports — not a scramble.
- How do I see live production from anywhere as the owner?
- The owner dashboard runs on your phone, web, or laptop and updates as supervisors enter doffing on the floor. Loom-wise production, shift-wise output, wastage flags, and order status are visible without you calling anyone. Most owners check it before chai, again at lunch, and once at end of day — the supervisors stop being interrupted, and you stop chasing.
- Can I check my unit's numbers without calling supervisors?
- Yes — that is the central design intent. Mobile doffing entry means production data comes from the loom, not from a register that gets compiled later. Inventory updates from the same entry. Wastage variance flags surface in the same shift. The 9 PM phone call to ask "how many meters did we do" stops happening.
- What does the owner dashboard actually show?
- Total production for today, yesterday, this week, this month. Top-performing looms and looms needing attention. Yarn wastage by SKU. Taka grade summary (A / B / C / reject). Outstanding orders and dispatch status. All loom-wise and shift-wise. The dashboard is configurable — most owners have us tune it during the AS-IS phase to surface the numbers they personally watch.
- How long before I see real value as the owner?
- Production tracking comes live in week 9 of the typical 10–12 week rollout. From day one of go-live, you see live floor data on your phone. The bigger value compounds over the first quarter as wastage flags catch issues earlier, requirement planning prevents yarn shortages, and your accounts team stops re-entering data — that is when the rupee impact becomes obvious.
Continue with what owners look at next.
Total production, top-performing looms, wastage by SKU, taka grade summary.
Read →Loom-wise profitability, dashboards, mobile owner view.
Read →A simple ROI tool to quantify the cost of late wastage detection.
Read →A 160+ loom water-jet unit in Surat, on the system since the start.
Read →Tally manages the books; it does not manage a weaving floor.
Read →Six factors that shape the cost, what's included, how to get a quote.
Read →Want to see the owner dashboard with your unit's data?
Send your loom count and what you're currently tracking. We'll show you what changes.